Fluke 726 [FLUKE-726] Precision Multifunction Process Calibrator

The Fluke 726 precision multifunction process calibrator is designed specifically for the process industry with broad workload coverage, calibration power and unsurpassed accuracy. The Fluke 726 measures and sources almost all process parameters and can calibrate almost anything. Additionally, this Fluke multifunction process calibrator will interpret results without the help of a calculator and stores measurement data for further analysis. Two separate channels allow the Fluke 726 to measure, source and view process signals simultaneously.

The Fluke 726 precision multifunction process calibrator measures volts, mA, RTDs, thermocouples, frequency and resistance to test sensors and transmitters. The 726 can also source/simulate volts, mA, thermocouples, RTDs, frequency and pressure to calibrate transmitters. With a pressure pump (sold separately), Fluke 726 calibrators can measure or source pressure using an of the 29 Fluke 700PXX pressure modules. Other features of the Fluke 726 include the ability to perform fast linearity tests with auto step and auto ramp features, as well as powering transmitters during tests using a 24V loop supply and simultaneous mA measurement.

Memory storage for up to 8 calibration results allows the Fluke 726 precision multifunction process calibrator to return stored calibration data from the field for later analysis. The Fluke 726 also features HART mode, which utilizes a 250Ω resistor for compatibility with HART instrumentation.

---

Features:

---

• More precise measurement and calibration source performance
  
• Accuracies of 0.01%
  
• Transmitter error % calculation
  
• Interpret calibration results without calculator
  
• Memory storage for up to 8 calibration results
  
• Return stored calibration data from field for later analysis
  
• Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
  
• HART mode inserts 250 ohm resistor in mA
  
• Measure and source for compatibility with HART instrumentation
  
• Integrated pressure switch test allows you to capture set, reset and deadband of switch
  
• Custom RTD curves add calibration constants for certified RTD probes, for enhanced temperature measurement
  
• New voltage input protection design for improved reliability
  
• Two separate channels
  
• Measure, source and view process signals simultaneously
  
• Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
  
• Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
  
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
  
• Perform fast linearity tests with auto step and auto ramp features
  
• Power transmitters during test using 24V loop supply and simultaneous mA measurement
  
• Store frequently-used test setups for later use
  

---

What's In The Box:

---

• (1) Test Lead Set (TL75)
• (1) Test Clip Set (AC72)
• (1) Stackable Test Lead Set
• (4) AA Batteries
• (1) User Manual

---

Brochure/Datasheet

---

Instruction Manual

---

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu