Fisher Labs TW-82- [TW-82-HC] Single Frequency Digital Underground Line Tracer with Hard Case

Rp.55.500.000
Ketersediaan:
4 - 6 MINGGU
Kode Produk:
TW-82-HC
Merk:
Fisher Labs
  • Free delivery

  • Money back guarantee

Share

The Fisher Labs TW82HC Single Frequency Digital Underground Line Tracer with Hard Case is an easy-to-use single frequency, one-button pipe and cable locating system designed to trace all conductive lines including pipes, cables and conductive electrical lines. Its ultra-fast target response ensures fast and accurate locating. The transmitter utilizes automatic load impedance matching to adjust output signal for best power output for the ground conditions. The TW82HC is weatherproof and impact-resistant, and features sealed, thick-wall, injection-molded construction. The included hard case protects the TW82HC unit in transit.

The TW82HC is used to locate and trace buried utilities using three tracing methods: conductive, inductive, and via coupling clamp. The conductive method uses the accompanying transmitter to energize the buried utility by making a direct electrical connection to it with conductive tracing cables. In most cases, this method sets up the strongest magnetic field for the receiver to sense above ground. The inductive method is ideal for when a direct physical connection to the utility is unavailable. The utility may be energized indirectly by magnetically coupling an energizing current from the accompanying transmitter. The coupling clamp method is for use when a utility may be exposed, but does not provide a direct connection for the conductive tracing cables. The accessory coupling clamp can be clamped around the exposed utility to magnetically couple an energizing current from the accompanying transmitter into the utility.

Signal strength is strongly influenced by the depth of the utility. Audio signal will decrease in volume further away from the utility, will increase in volume closer to the utility, and will be silent when directly over the utility. Rotational arrows on the display indicate the utility's path relative to the user's position.


Features:

  • Displays Depth, Azimuth, Signal Current, Left/Right/Over-Target
  • Provides full-time continuous readouts
  • Weatherproof, impact resistant and IP65 compliant housing
  • Includes Hard Case
  • Operating Temperature Range: -4°Fto 140°F (-20°C to +60°C)
  • Two-button receiver operation
  • Ergonomic, lightweight design
  • Programmable lateral mode
  • Transmitter Output Frequency: 82.175 kHz
  • Receiver Frequency: 82.175 kHz
  • Left/Right Guidance: Audible and Visual
  • Azimuth Indicator: Visual
  • Conductive Tracing Impedance Matching Range:
  • Normal Power: 2 to 8,000 ohms -6dB
  • High Power: 2 to 3,000 ohms -6dB
  • Inductive Tracing Magnetic Strength:
  • Normal Power: 15 Vm2
  • High Power: 25 Vm2
  • Transmitter Battery Type: Four D-cell batteries (included)
  • Transmitter Battery Life: Typically 130 hours
  • Signal Strength Indicator: Numeric display & audible
  • Signal Current Measurement: Numeric display, automatic
  • Depth Measurement: Numeric display, automatic
  • Receiver Battery Type: Two D-cell batteries (included)
  • Receiver Battery Life: Average 100 hours


What's In The Box:
  • (6) D-Cell Batteries
  • (1) Transmitter Unit
  • (1) Receiver Unit
  • (1) Ground-Rod Assembly
  • (1) Hard Case
  • (1) User Manual


Brochure/Datasheet


Instruction manual


Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu