Thru-Paint Mode (E-E) eliminates the Coating and only measures Wall Thickness. Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method.
6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C.
The device is equipped for automatic detection of the intelligent ultrasonic probes and re-calibration is not required upon switching probes. The calibration data of the sensor is saved in the probe.
Uninterrupted scanning of a part for thinning is possible at the minimum mode.
Includes Factory "Works" Calibration Certificate, NIST Cert Optional
Thru-Paint Mode (E-E) eliminates the Coating and only measures Wall Thickness
Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second
Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output
Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE)
Adjustable units inch/mm
Resolution of 0.001" (0.01 mm)
Automatic identification of probes
Automatic Probe Zero function
Uses Pulse-Echo (P-E) or Echo-Echo (E-E, thru-Paint) Principles of Ultrasonics
Sensitivity can be set to "Auto" or "Manual"
Several Transducers are optionally available including one for High Temperature materials (350 °C)
What's In The Box:
(1) Device MiniTest 440
(1) U5.0E , 5 MHz Standard probe
(1) Instruction manual German/English (French under preparation)
(2) 1.5 V battery LR 06 / AA
(1) Protective rubber cover
(1) Bottle (200 ml) anti-corrosion coupling agent
(1) Data transmission cable (only for MiniTest 430 / 440)