SKF CMSS 200-10-SL Machine Condition Indicator

Not yet rated Tulis ulasan
Rp.54.500.000
Ketersediaan:
10 - 14 HARI KERJA
Kode Produk:
CMSS 200-10-SL
Merk:
SKF

  • Free delivery

  • Money back guarantee

Share

The SKF Machine Condition Indicator is an economical vibration sensor and indicator for monitoring non-critical machines. It is ideal for machinery with constant operating conditions not previously monitored in plants (fig 1). The device can be compared to the "check engine" light in a car. What the "check engine" light does for the car, the SKF Machine Condition Indicator does for industrial machinery. Internal sensors measure velocity, enveloped acceleration (bearing or gear impulsive vibration) and machine surface temperature.

The included magnetic read-key (fig 2) is used to activate the SKF Machine Condition Indicator, change operating modes, set vibration baselines and acknowledge alarms.

The unit features three LEDs to indicate the machine and bearing condition. Once the unit is illuminated, it alerts the predictive maintenance technician to do a root cause analysis on the machine. In addition, it features a barcode with serial number for machine identification purposes and easy incorporation into an Operator Driven Reliability (ODR) program, maintenance routes or scheduled check-ups.

The SKF Machine Condition Indicator is slightly larger than a standard industrial accelerometer. It is 68.3 mm (2.688 in.) in length and has a stainless steel base diameter of 33.7 mm (1.325 in.).

The enclosure is made of durable polymer. The interior is entirely sealed to environmentally protect the electronics and to achieve the highest ingress protection rating (IP 69K).

The stainless steel base on the bottom of the unit has 1/4-28 tapped threads for stud mounting.

What the “check engine” light does for the car, the SKF Machine Condition Indicator does for industrial machinery. Once the SKF Machine Condition Indicator is illuminated, it alerts the predictive maintenance technician to do a root cause analysis on the machine.

Internal sensors measure velocity, enveloped acceleration (bearing or gear impulsive vibration) and machine surface temperature.

A magnetic read-key is included to program the SKF Machine Condition Indicator. It is used to activate the SKF Machine Condition Indicator, change operating modes, set vibration baselines, acknowledge alarms, and reset the SKF Machine Condition Indicator.

The SKF Machine Condition Indicator features three LEDs that rotate and blink green, amber or red at various intervals and durations to indicate the current mode or alarm status.


Features:
  • Autonomous operation
  • Velocity measurements for general machine health
  • Enveloped acceleration measurements for early detection of bearing failure
  • Temperature measurements to indicate uncharacteristic heat
  • Two modes of operation to address many different machine types
  • Transient protection and retry algorithm to avoid false alarming 


What's In The Box:
  • (10) 10 battery operated units
  • (4) CMAC 225 read-keys (magnets)
  • (4) CMAC 200-REF reference cards
  • (2) Installation Instruction cards
  • (1) Product reference CD

Brochure/Datasheet
Instruction Manual
Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu

Tulis ulasan