Range with Standard Delay Line Transducer: 0.0060" - 1.000" / 0.150 - 25.40 mm; Range with Contact Transducers: up to 36.00" / 915.0 mm. The TI-007DLX is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The TI-007DLX does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software.
The TI-007DLX has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).
Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode.
The TI-007DLX can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm).
Includes NIST Traceable Calibration Certificate
Large, backlit LCD display retains last reading
Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm
Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output
Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the
"scan" will be displayed
Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz)