• Dwyer 2000 Series [2201] Magnehelic Pressure Gauge, 0 to 1 psi

Dwyer 2000 Series [2201] Magnehelic Pressure Gauge, 0 to 1 psi

Rp.2.800.000
Ketersediaan:
6 - 8 MINGGU
Kode Produk:
2201
Merk:
Dwyer Instruments
Produk ini memiliki jumlah minimum 5
  • Free delivery

  • Money back guarantee

Share

Dwyer 2000 Series [2201] Magnehelic Pressure Gauge, 0 to 1 psi. Dwyer 2000 series pressure gauge uses Dwyer's simple, frictionless Magnehelic® gauge movement, to quickly indicate low air or non-corrosive gas pressures — either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. There is no manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

The Dwyer 2000 series is available in ranges up to 30 psi (or equivalent) and is accurate up to ±2% of FS. The gauge is available in a number of pressure units, including dual scale. Compound ranges are also available. A number of options can be added to tailor the 2000 series gauge to your specifications.

The Dwyer 2000 series pressure gauge has a 4-inch dial face. It can be either flush or surface mounted with standard hardware supplied. Although calibrated for vertical position, many ranges may be used at any angle by simply rezeroing. However, for maximum accuracy, they must be calibrated in the same position in which they are used.


Features:
  • For use with air and compatible, non-combustible gases
  • Die cast aluminum case and bezel, with acrylic cover
  • Exterior finish is coated gray to withstand 168 hour salt spray corrosion test
  • Pressure ranges to 30 psi (or equivalent)
  • Accuracy up to ±2% of FS
  • 4" diameter dial face
  • Temperature limits: 20 to 140°F
  • 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
  • Bezel provides flange for flush mounting in panel
  • Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover
  • RoHS approved


What's In The Box:
  • (2) 1/8" NPT plugs for duplicate pressure taps
  • (2) 1/8" pipe thread to rubber tubing adapters
  • (3) Flush mounting adapters with screws


Brochure/Datasheet 


Instruction Manual


Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu