The Martel PSC-4010 process calibrator is a hand-held, full function voltage and current calibrator with the capability to both read and simulate common process control signals.
The Martel PSC-4010 process calibrator incorporates multiple input/output ranges for both current and voltage operating modes. When operated in the current mode, the Martel PSC-4010 process calibrator can source, simulate, or read over a 0 to 24 mA range with 0.01 mA resolution. The Martel PSC-4010 process calibrator can also supply 24 VDC to power a two-wire transmitter while simultaneously reading back its output both in milliAmps or as a % of full scale. When operated in the voltage range, the Martel PSC-4010 process calibrator can read or source over two ranges, 0 to 20.00 V or 0 to 200.0 mV.
For your convenience, you can store up to three (3) calibration points in the memory of your Martel PSC-4010 process calibrator for each voltage or current range. These calibration points are non-volatile and will remain in memory until the user changes them.
Simple, straight forward, Intuitive user interface
Easy to learn yet powerful 3 Key Martel Menu System
New ClearBrite™ Graphic Display
New streamlined case design
Reads and simulates process control signals voltage, current, and frequency
Multiple input/output ranges for current, frequency, and voltage modes
Built-in 24 VDC source for powering two wire transmitters