• CMT ALTO-G12 [ALTO-38-PKG] L1 Hand Held Sub-meter GPS/GIS Data

CMT ALTO-G12 [ALTO-38-PKG] L1 Hand Held Sub-meter GPS/GIS Data

Not yet rated Tulis ulasan
Rp.93.500.000
Ketersediaan:
4 - 6 MINGGU
Kode Produk:
ALTO-38-PKG
Merk:
CMT (Corvallis Microtechnology Inc.)

  • Free delivery

  • Money back guarantee

Share

An excellent unit for precision agriculture, hydrographic surveys, and utility mapping. Signal inaccuracies are removed with RAIM (Receiver Autonomous Integrity Monitor). The built-in strobe correlator technology provides unmatched multi-path mitigation for code. NMEA / Barcode Device Interface Capabilities

  • Two 9-pin RS-232 serial ports, PC/AT pinout.
  • The ALTO-G12 has two waterproof DB-9 RS-232 serial ports (COM1: and COM2:) for communication with your PC as well as a variety of additional input and output devices such as:

Simply plug your RTCM-104 source (i.e. FM pager, VHF radio, WADGPS) into the ALTO-G12's COM1: port. The ALTO-G12 will automatically detect and use the RTCM message. Since the ALTO-G12 has two DB-9 serial ports, you can use COM1: for RTCM and still have COM2: available for a barcode reader or NMEA output to another instrument. Don't worry if you lose the RTCM message while you are collecting data; the ALTO-G12 can be set to collect raw data and will automatically warn you so you can post-process your data.

Compatible with Coast Guard Beacon Receiver . Obtain real-time differential correction with CMT's Coast Guard Beacon Receiver package.

NMEA 0183 output
The ALTO-G12 will send out a NMEA 0183 message, at an interval specified by you, to either COM1: or COM2:. This functionality allows the ALTO-G12 to output a GPS position to devices (i.e. digital cameras, sonar, etc.) that will accept a NMEA 0183 message. There is no need to change your instrument settings. The ALTO-G12 communications can be set to match your instrument. In the NMEA Setup screen, you have complete control over the baud rate and protocol settings.

Efficient Data Entry with Bar Code Input
Attach a bar code scanner to the ALTO-G12 and you can quickly enter data. Bar code menus can be set up in such a way that you never need to touch the ALTO-G12 keyboard.

The ALTO-G12 package includes CMT's PC-GPS software for comprehensive GPS project management and mapping. PC-GPS 05 provides functions for Mapping, Mission Planning, Batch Differential Correction, Static Point "Spread" analysis and Job Editing. The software also supports GIS layering, raster images (i.e. DOQs, DRGs, aerial photographs, satellite imagery), multimedia objects (OLE 2.0) and Microsoft® ODBC.


Features:

System Features:

  • 12-channel L1 frequency
  • Strobe Correlator technology
  • Full wavelength carrier phase on L1
  • Carrier-phase smoothing
  • RTCM-104 Ver. 2.2 input
  • NMEA 0183 Ver. 2.2 output
  • 1 PPS timing signal

Data Collector Features:

  • Waterproof (submersible)
  • Operating temperature: -40°C to 54°C
  • 16 line x 25 character backlit display
  • 4 MB RAM standard (8 MB optional)
  • Fully integrated GPS receiver, antenna and data collector in one hand-held unit
  •  55-key alphanumeric keyboard including 5 function keys and separate numeric keypad
  • Optional external antenna
  • Field-replaceable rechargeable battery
  • Up to 8 hrs. operation on rechargeable batteries

CMT Field Software v3.8
  • Collect Points, Lines Areas
  • Feature/Attribute/Value GIS structure
  • Graphic plotting.
  • Traversing keyboard data entry to allow you to continue mapping when GPS is obstructed
  • Offset function to map hard-to-reach locations.
  • Nested point function for tagging points while you are mapping a Line or Area Feature.
  • Averaging function to optimize accuracy while recording static points.
  • LLA/UTM/SPC plus user-defined coordinates.
  • Supports 50 datums plus user-defined datums.
  • Provides area calculation in the field
  • Interfaces to laser rangefinders, barcode readers and various NMEA devices
  • Canyon, Blockage and Clear modes for optimal tracking performance


What's In The Box:


  • (1) GPS Unit
  • (1) Field Software Version 3.8
  • (1) PC-GPS Version 0.9
  • (1) 4 Megabyte RAMDISK
  • (2) Field Replaceable Batteries (ALT-BATPAK)
  • (2) Smart Chargers (ACC-SMC-G3-M)
  • (1) PC Transfer Cable
  • (1) RTCM Input/NMEA Output
  • (1) C/A Code Differential


Brochure/Datasheet


Instruction manual


Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu

Tulis ulasan