The Seametrics PT12 Pressure/Temperature Sensor has been designed to provide trouble-free submersible operation in liquid environments. This sensor communicates via SDI-12 (v1.3) or Modbus® RTU (RS485)protocol.

Pressure/level is measured with an extremely rugged and stable piezo-electric, media isolated pressure element and compensated for temperature using our proprietary calibration methodology. Temperature is measured using an on-board digital chip.

Seametrics also carries a special version of the PT12 designed to measure barometric pressure in reference to absolute pressure. If you are using an absolute PT12, contact your representative for details on how our PT12-BV can facilitate obtaining barometrically compensated pressure/level.

Features:

• SDI-12 v1.3 interface
• Modbus® RTU interface
• Optional U.S.G.S. OSW accuracy enhanced calibration on the 15 PSIG unit.
• Available with a variety of cable options, including polyethylene, polyurethane, and FEP
• Available in absolute and gauge versions
• 316 stainless steel, fluoropolymer, and PTFE construction (titanium optional)
• Optional automatic barometric compensation for absolute units using a PT12-BV Barometric Sensor (SDI-12 only)
• Available from 5 PSI to 300 PSI
• Optional 1/4″ NPT inlet

What's In The Box:

• (1) Instruction manual
• Note: Requires cable
  

Brochure/Datasheet

Instruction manual

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu