The dipper-T water level meter is designed for well drillers, consultants and hydrogeologists all across the globe. The dipper-T is manufactured for professionals who require the most accurate measurements of water levels, length of well-casing and total well-depth.
The Herondipper-T is renowned for its premium, polyethylene coated yellow steel tape accuracy in measuring depth to water. Available in your choice of either metric or engineering scale.
The dipper-T water level meter can be conveniently converted to a multi-functional instrument, not only able to measure static and falling head levels, but also to determine the length of casing and well depth. The water level sensing probe can be easily removed at the link connection and substituted with either the Well Casing Indicator Probe or Well Depth Indicator Probe. The FOUR FUNCTION capability of the dipper-T water level meter makes this unit an asset to groundwater professionals and rural property owners during the construction of new wells, maintaining wells or decommissioning abandoned wells.
Static mode is used for measuring the depth of water in wells, boreholes and standpipes. DrawDown mode is used for measuring falling water levels during purging, well development and for low flow sampling.
The Well Casing Indicator Probe is used to measure the depth of metal casing in wells and boreholes from two inches in diameter and upward. The Well Casing Indicator Probe works using magnetism. While the probe sits within the magnetic field of the steel casing, an auditory and visual signal is active. When the probe leaves the magnetic field the signal stops. Note the condition of the well for accurate readings. Recommended Use: New Construction Only (Old/Imperfect casing may cause false or inaccurate readings when using this probe).
The Well Depth Indicator Probe (or bottom detector) is used to measure the full depth in wells and boreholes. The Well Depth Indicator Probe uses a pressure sensitive plunger to measure the distance to the bottom of the well. When the Well Depth Indicator Probe reaches the bottom of the well, the plunger enters the probe body closing a switch, initiating an audible and visual signal at the top of the well.
Electronic Module (IP65)– mode change forstaticanddrawDownlevels, removable for easy cleaning
and servicing. Circuits and components are potted to protect from moisture and dust intrusion
Sensitivity Switch– to adjust for false signals from cascading water
Link– to prevent damage to the tape, the probe is sacrificed at the link area if stuck in the well
Probe (IP68)– 5/8” (1.59cm) fully pressure/depth rated*, no holes or recesses for contaminate build up,
field replaceablefor optional casing or depth detector probes
Steel Tape– high tensile steel, jacketed withpolyethylene, high break strength, stretch resistant andlifelong
legibility– markings in metric (mm) or engineering scale (1/100’)